Steering & Suspension (24)

30pc Master Press & Pull Sleeve Kit For the removal & installation of bushes, bearings & seals • Universal applications: Cars, SUV’s, etc • High quality CRV construction

Slide Hammer Puller Kit • External & Internal 2 & 3 jaw pullers, grip wrench adaptor, lip puller, hub puller & dent puller • 2.5kg slide hammer with 570mm shaft

10pc Bearing Race & Seal Driver Set • Designed to allow operator to install bearing cases & seals without damage • Ideal for installing wheel bearing outer races • 39.5mm...

Remove the most stubborn struts and ball joints with ease • Allows easy removal and installation of struts and ball joints • Interchangeable spreaders prevent damage to aluminium or cast...

• To push down the wishbone and other suspension parts, e.g. during the disassembly of the drive shaft, during replacing the gaiter or exchange of the wheel bearing. • After...

5PC Ball Joint Extractor Set • Set of three forks & two handles • 15/16” Ball-joint separator • 1-1/8” Pitman-arm wedge • 11/16” Tie-rod spreader • 8” manual knurled grip...

Universal Knuckle Spreader Master Kit • Suitable for removal and installation of spring and shock strut from steering knuckle • Prevents expensive damage to aluminium or cast iron steering hubs...

Universal Ball Joint Separator-2 Step Adjustable (18-24mm) • 18-24mm jaw capacity • 2 Step adjustable (30mm to 50mm) to give a greater range for different vehicles

Coil Spring Compressor • Internal coil spring compressor is used for the installation & removal of springs & spacers • Strong steel jaws hook securely into the coil spring

Steering Wheel Puller Set • Two-leg puller with two pairs of legs & two thrust caps • Includes yoke, thrust bolt • For use on GM & Ford vehicles

Bearing packer (Cup Style) • Self-contained, • No air line or grease gun required • Packs 50-60 bearings without refilling • Transparent cup allows grease level check • Works on...

CV Band Pliers• Offset cutter designed for easy removal of stainless steel CV joint clips and hose clamps without damaging the boot or hose • Profiled jaws prevent band slipping...

Mini Ball Joint Separator (Jaw Capacity 19mm) • Chrome-plated finish drop forged steel body with thrust bolt • Suitable for most small cars and light vans • Jaw opening 19mm

CV Boot Clamp Banding Tool • For installing band style clamps that require the tensions to be maintained while the band is locked into place • Built in cutter &...

Wrack Wrench Cam design increases force as load is applied • For servicing all inner tie rod ends • Suits multiple rack ends & sizes: hex drive, round with two...

Hubnut Socket 55mm (Toyota) • For use on front Wheel Adjusting nuts • 1/2” drive • Suits most popular 4 Wheel drive hub Nuts, eg. Toyota • 55mm 6pt Hex

Hubnut Socket 54mm (Nissan) • For use on front Wheel Adjusting nuts • 1/2” drive • Suits most popular 4 Wheel drive hub Nuts, eg. Nissan • 54mm 6pt Hex

Pulley Puller • For removing alternator and power steering pulleys

Pitman Arm Puller • 1-15/16” opening, 2-1/2” pull • 33mm opening, 63mm pull

Tie Rod End Puller & Pitman Arm Puller • High quality alloy steel • 1-1/16” opening, 1-3/4” pull • 27mm opening, 44mm pull

Steering Wheel Puller • Heavy Duty Design • 2 Hole Yoke Suits Most Steering Wheels • Includes 1/4”, 5/16” & 3/8” M8 Bolts

Universal Bearing Packer • For use with grease guns, the design incorporates grease nipple at one end which easily adapts to the grease gun coupler

• Wedge type tool for separating rod ends from steering knuckles • High quality alloy steel • Fork size: 24mm, Length: 300mm

• Wedge type tool for separating rod ends from steering knuckles • High quality alloy steel • Fork size: 19mm, Length: 400mm