Engine (82)

• Suits the workshop that handle a wide variety of vehicles multi-point, throttle body & CIS system continuous Injection systems • All Adaptors, gauges & hose assemblies feature a quick...

Diesel Injection System Priming Pump Kit • Essential for reintroduction of fuel into fuel pump following maintenance, such as fitting of new diesel filter or drainage of fuel tank. •...

QUICK FLOW DRILL PUMP • Universal adaptor straps to all drill sizes • 3 Litres per minute at 1,200 RPM • Steel gear shafts running in brass bushes • Suitable...

QUICK FLOW TRANSMISSION ADAPTOR KIT TO SUIT QUICK FLOW DRILL PUMP KIT • Kit contains adaptors required to refill many sealed automatic transmissions.

Oil Evacuation System - 6L • Fast, no mess fluid removal • Air operated, “no moving parts” fluid extraction unit • Suitable for automotive & industrial applications Oil extraction: engine,...

Automotive Diesel Compression Tester Set • A basic set for diesel work• Tester has a handy deflator for releasing air & retesting • A 16-1/2” wire reinforced hydraulic hose has...

Crank Seal Removal & Installation Kit • Compact puller with unique extracting hooks engage seal for quick removal • Interchangeable sleeves & mandrels allow easy installation of new seal •...

AC & Fuel Line Disconnect Kit - 8pc • For use in decoupling automotive air conditioning hoses and fuel lines

CYLINDER LEAK DETECTOR & CRANK STOPPER • Pinpoints low compression cause ie burnt valves, worn rings, etc • Crank stopper locks engine in place to facilitate installation of timing belts...

Used to clean/decarbonise injectorseats when changing injectors Set of four diesel injector seat cleaners, centring pilot and T-handle Centring pilot: 7mm Various Vehicles: 15mm Delphi/Bosch: 17mm (BMW, PSA, Ford) Bosch...

1/2” Square Drive or Hex Drive Suits Oil Filters Ø60mm – Ø100mm

Designed to measure return fuel flow on diesel vehicles up to 8 cylinders fitted with common rail injection system Identifies, worn, blocked or inoperative injectors quickly & easily Supplied with...

Valve Spring Compressor • Suitable for use on multi valve petrol & diesel engines with deep-seated valves • 55-175mm cap. & 165mm throat depth • General use on OHC, OHV...

• Designed to check engine oil pressure in both cars& trucks. • The kit enables testing of the switches, sensors, dashboard gauge and indicators linked to the oil pump •...

Screw Type Overhead Valve Spring Compressor • Easily remove valve springs on most cars & light trucks

• Helps remove & replace drain plugs in hard to reach locations on differentials, gearboxes & engine sumps.

• Small Portable Fluid Extractor • Operates on Compressor Air • 1 Litre Capacity

Crankshaft Bolt Removal Tool - 1/2” Dr. • Reduces service time • Use where impact guns won’t fit • Loosens and tightens bolts • Recommended for use with impact sockets...

Engine Cylinder Hone • Range 51mm to 178mm • Three leg hone for removal of glaze from cylinders • Fitted with 100mm medium grit stones • Adjustable tensioner • Flexible...

Timing Gear Holder/ Single Cam Clamps Kit • Securely holds the timing gear during removal or installation • Prevents timing gear movement while the retaining bolt is removed • Allows...

Heavy Duty Compression Tester Kit • Easy reading 2-5” Gauge features colour coated quadruple calibrations 0-300psi 21kg/cm, 21bar & 2100kpa 13” durable rubber hose with 14/18mm adapter • 6” Heavy...

• This universal kit covers most single overhead cam engines, twin cam engines and quad cam engines • Lock camshafts to hold valve timing during belt replacement • Reduces repair...

Diesel Engine Compression Tester Set • For both direct & indirect diesel injected cars • Checks engine compression under cranking conditions • Small probe, quick coupling Adaptors for speed &...

Multi-purpose syringe ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials Translucent body allows easy inspection of oils and fluids. 1.5 Litre capacity...

FEATURES Suitable for fast and safe removal, inspection or replacement of Bosch, Delphi, Denso and Siemens diesel injectors. Set includes heavy duty slide hammer, 1/2”Dr deep open profile sockets, used...

4pc singles Cam Clamp Set• 4 x Cam Clamp Timing Gear Clamps• 4 x Cam Clamp Bolt Extensions • Use on single, twin and quad cam engines to hold valve...

Timing Gear Holder • Securely holds the timing gear during removal or installation • Slimline design allows maximum access

Suits oil filters up to Ø300mm Satin finish cast steel body with 3/8” and 1/2” sq drives Extra wide nylon webbing strap

Stretch Belt Tool • Universal installation and removal of stretch fit belts • Easily Installs all Stretch fit belts • Allows removal and reuse of stretch fit belts • Instructional...

• 8 valve pinchers • Universal jaw with 75-165mm capacity & 150mm throat depth • Universal compressor with strong adjustable cam-action • Parallent lift and automaticlocking suitable for small to...

Vacuum/Fuel Pump Tester Kit • Checks for leaky or defective parts in vacuum systems and mechanical fuel pumps

• Check fuel injector signal faults fast • Simply disconnect injector harness & plug in noid light • Easy to use and suits a wide variety of injector harnesses •...

4 in 1 Compression Tester • Quick Cylinder Pressure Meter • 2.5’’ gauge with Dual Scale, 0-300psi, 0-21kg/cm2, 0-300psi

Essential for reintroduction of fuel into fuel pump following maintenance, such as fitting of new diesel filter or following drainage of fuel tank

Camshaft Pulley Remover / Installation Kit • Designed to hold the camshaft pulley stationary while loosening & tightening the centre shaft bolt • Fixed distance 54 - 120mm

Engine Oil Pressure Tester • Adaptors for most vehicles • 610mm flexible hose • Pressure scale: 0-100psi / 0-700kpa

Steel Line Stopper Kit • Use to seal steel lines once disconnected • Prevents fluid leaks and contamination during service

Multi-purpose syringe ideal for the transfer of oils/fluids to and from vehicle components such as gearboxes and differentials Translucent body allows easy inspection of oils and fluids. 200ml capacity Suitable...

Used to hold the valves closed whilst springis compressed Spark plug adaptor with 14mm and 18mmthreaded fittings for car and lightcommercial use Valve assembly maintains cylinder pressurewhen air supply is...

Adjustable serrated jaws lock into position providing maximum grip on "oily" oil filters Made from heavy duty hardened steel Comfortable dipped PVC handles for extra grip Removes oil filters: 52mm(2-18”)...

Piston Ring Compressor • 75 - 175mm • Double band adjustable tensioner • Self locking ratchet • Supplied with tightening arm

3 Leg Fuel Tank Sender Spanner • Used for removal & re-fitting tank sender moulding rings • Range: 75-160mm Diameter • Use with a 24mm spanner or socket

• 2 x Cam clamp timing gear clamps • 2 x Cam clamp bolt extensions • Use on single, twin and quad cam engines to hold valve timing during belt...

Nylon Strap Oil Filter Wrench • Suits oil filters up to 150mm • 1/2” square drive

Piston Ring Compressor • 50 - 125mm • Double band adjustable tensioner • Self locking ratchet • Supplied with tightening arm

• Suits: Hyundai, Kia, Land Rover, Range Rover & Jaguar • Size: 15 flutes x 88.8mm x 3/8” dr. • Use Torque: 25N-m±5N-m • Chrome Finish

Oil/Fluid Drain Pan • 16 ltr • 600 x 450 x 180mm

Cylinder Honing Stones • 100mm medium replacements stones • Suits the SP Engine Cylinder Hone (SP63038)

Oil Filter Wrench - 64.5mm x 3/8” Dr Suits: Toyota & Lexus (6 & 8 Cylinder) • Suits Toyota & Lexus 6 & 8 Cylinder Toyota: 2007-2008 V6, Corolla-(2007-2009)4cyl, Tundra-(2007)8cyl,...

• Suits Toyota & Lexus (2006 ~) 4, 6 & 8 cylinder vehicles · Prevents ol from getting out of the housing when changing oil filters · 900mm long oil-resistannt...