VACUUM BRAKE BLEEDER FEATURES & BENEFITS

• Large 4L capacity collection container
• Quickly dispose of waste fluid via small remote cap
• Storage point for bleeder fitting prevents fluid leakage from hose when not in use
• High efficiency vacuum generator
• High quality quick-release coupler
• Overflow shut-off valve
• Locking air trigger

INSTRUCTIONS

• Drain old fluid from brake master cylinder reservoir and top up with new fluid
• Begin bleeding procedure on the wheel(s)furthest from the master cylinder
• Connect rubber bleeder fitting to the calliper bleed nipple and open nipple 1/4” turn only
• Operate brake bleeder and allow fluid to flow until clear fluid is seen in tube
• Close off bleed nipple
• Top off fluid level
• Repeat procedure on each wheel
  

IMPORTANT: AT THE COMPLETION OF BLEEDING, CHECK FOR FIRM BRAKE PEDAL